Our Product
Flat Turn Table
Just 85mm !!
It is possible to be installed directly on the floor surface (without pit).
Thus it is better suitable for the case that be installed it after construction.
Motion picture is available.
■Usage image
■ Rotation image
■ Features
a. Specification for simple installation (without pit)
b. Invertor motor and Urethane roller is included standard specification
c. Product height just 85mm
Structure
There are access hole on the turntable.
It is easier to change parts or maintenance.
The component is very simple and compact.
Urethane roller is standard specification thereby it has advantage in noiseless.
There are 2 buttons, right and left, on the panel.
Put the button to activate and Release the button to stop.
Turntable keeps rotating until release the button.
Installation type is independence or wall-hanging type.
Standard specification of material for the panel is plating paint.
*SUS-made panel is available as an option.
Cross section drawing
Motion picture is available.
■Usage image
■ Rotation image
■ Features
a. Specification for simple installation (without pit)
b. Invertor motor and Urethane roller is included standard specification
c. Product height just 85mm
Structure
There are access hole on the turntable.
It is easier to change parts or maintenance.
The component is very simple and compact.
Urethane roller is standard specification thereby it has advantage in noiseless.
There are 2 buttons, right and left, on the panel.
Put the button to activate and Release the button to stop.
Turntable keeps rotating until release the button.
Installation type is independence or wall-hanging type.
Standard specification of material for the panel is plating paint.
*SUS-made panel is available as an option.
Cross section drawing
ISB-40L
Motion picture is available.
■Usage image
b. Image of which car runs in the turntable
■Rotation image
a. Middle sedan type (of Japanese domestic maker )
■Features
a. Specification for simple installation (without pit)
b. Invertor motor and Urethane roller is included standard specification
c. Product height just 85mm
ISB-40L Structure
Access hole
There are access hole on the turntable.
It is easier to change parts or maintenance.
Drive unit
The component is very simple and compact.
Urethane roller is standard specification thereby it has advantage in noiseless.
Operating and Control panel
There are 2 buttons, right and left, on the panel.
Put the button to activate and Release the button to stop.
Turntable keeps rotating until release the button.
Installation type is independence or wall-hanging type.
Standard specification of material for the panel is plating paint.
*SUS-made panel is available as an option.
Cross section drawing
Turntable specification
| Type | Turntable Diameter (mm.) |
Length of Slop (mm) |
Movable load (kg.) | Height (mm) | Drive unit height (mm) |
Motor (kw) | Power Source |
| ISB-25L | 2500 | 300 | 250 | 100 | 100mm from finishing surface |
0.1 | 100V-200V |
| ISB-40L | 4000 | 300 | 2500 | 85 | 100mm from finishing surface |
0.4 | 100V-200V |
| ISB-45L | 4500 | 340 | 2500 | 90 | 100mm from finishing surface |
0.4 | 100V-200V |
ISB-40L
Motion picture is available.
■Usage image
b. Image of which car runs in the turntable
■Rotation image
a. Middle sedan type (of Japanese domestic maker )
■Features
a. Specification for simple installation (without pit)
b. Invertor motor and Urethane roller is included standard specification
c. Product height just 85mm
ISB-40L Structure
Access hole
There are access hole on the turntable.
It is easier to change parts or maintenance.
Drive unit
The component is very simple and compact.
Urethane roller is standard specification thereby it has advantage in noiseless.
Operating and Control panel
There are 2 buttons, right and left, on the panel.
Put the button to activate and Release the button to stop.
Turntable keeps rotating until release the button.
Installation type is independence or wall-hanging type.
Standard specification of material for the panel is plating paint.
*SUS-made panel is available as an option.
Cross section drawing
Turntable specification
| Type | Turntable Diameter (mm.) |
Length of Slop (mm) |
Movable load (kg.) | Height (mm) | Drive unit height (mm) |
Motor (kw) | Power Source |
| ISB-25L | 2500 | 300 | 250 | 100 | 100mm from finishing surface |
0.1 | 100V-200V |
| ISB-40L | 4000 | 300 | 2500 | 85 | 100mm from finishing surface |
0.4 | 100V-200V |
| ISB-45L | 4500 | 340 | 2500 | 90 | 100mm from finishing surface |
0.4 | 100V-200V |
ISB-45L
Motion picture is available.
■Usage image
b. Image of which car runs in the turntable
■Rotation image
a. Middle sedan type (of Japanese domestic maker )
■Features
a. Specification for simple installation (without pit)
b. Invertor motor and Urethane roller is included standard specification
c. Product height just 85mm
Structure
Access hole
There are access hole on the turntable.
It is easier to change parts or maintenance.
Drive unit
The component is very simple and compact.
Urethane roller is standard specification thereby it has advantage in noiseless.
Operating and Control panel
There are 2 buttons, right and left, on the panel.
Put the button to activate and Release the button to stop.
Turntable keeps rotating until release the button.
Installation type is independence or wall-hanging type.
Standard specification of material for the panel is plating paint.
*SUS-made panel is available as an option.
Cross section drawing
Turntable specification
| Type | Turntable Diameter (mm.) |
Length of Slop (mm) |
Movable load (kg.) | Height (mm) | Drive unit height (mm) |
Motor (kw) | Power Source |
| ISB-25L | 2500 | 300 | 250 | 100 | 100mm from finishing surface |
0.1 | 100V-200V |
| ISB-40L | 4000 | 300 | 2500 | 85 | 100mm from finishing surface |
0.4 | 100V-200V |
| ISB-45L | 4500 | 340 | 2500 | 90 | 100mm from finishing surface |
0.4 | 100V-200V |
ISB-45L
Motion picture is available.
■Usage image
b. Image of which car runs in the turntable
■Rotation image
a. Middle sedan type (of Japanese domestic maker )
■Features
a. Specification for simple installation (without pit)
b. Invertor motor and Urethane roller is included standard specification
c. Product height just 85mm
Structure
Access hole
There are access hole on the turntable.
It is easier to change parts or maintenance.
Drive unit
The component is very simple and compact.
Urethane roller is standard specification thereby it has advantage in noiseless.
Operating and Control panel
There are 2 buttons, right and left, on the panel.
Put the button to activate and Release the button to stop.
Turntable keeps rotating until release the button.
Installation type is independence or wall-hanging type.
Standard specification of material for the panel is plating paint.
*SUS-made panel is available as an option.
Cross section drawing
Turntable specification
| Type | Turntable Diameter (mm.) |
Length of Slop (mm) |
Movable load (kg.) | Height (mm) | Drive unit height (mm) |
Motor (kw) | Power Source |
| ISB-25L | 2500 | 300 | 250 | 100 | 100mm from finishing surface |
0.1 | 100V-200V |
| ISB-40L | 4000 | 300 | 2500 | 85 | 100mm from finishing surface |
0.4 | 100V-200V |
| ISB-45L | 4500 | 340 | 2500 | 90 | 100mm from finishing surface |
0.4 | 100V-200V |